Available in both two-throw and four-throw configurations with 3”, 3-1/2”, and 4-1/2” stroke, rated at 10,000 pounds Tension and Compression frame load capacity. This series uses the TP style as well as Eagle compressor cylinders mounted on a larger wider base, and accommodates up to 12” diameter bore cylinders.
Number of throws
1
Horsepower
60
RPM (min - max)
350-800
Frame lubrication
Splash
Stroke
4.5
Piston speed (fpm)
600
Crankshaft Centerline (inches)
13
Overall width, (max.) (inches)
90
Overall length, (max.) (inches)
29
Approx. weight (frame only) (lbs)
-
Rod Loads, (tension) (lbs)
6,000
Rod Loads, (compression) (lbs)
6,000
Rod Loads, (combined) (lbs)
12,000
Oil pump capacity (gpm)
-
Crankcase oil capacity (gal)
2.0
Oil Pressure (min - max) (psig)
-
Crankpin diameter (in)
35-60
Main bearing diameter (in)
-
Piston rod diameter (in)
-
Number of throws
1
Horsepower
60
RPM (min - max)
350-800
Frame lubrication
Splash
Stroke
4.5
Piston speed (fpm)
600
Crankshaft Centerline (inches)
13
Overall length, (max.) (inches)
90
Overall length, (max.) (inches)
29
Approx. weight (frame only) (lbs)
-
Rod Loads, (tension) (lbs)
6,000
Rod Loads, (compression) (lbs)
6,000
Rod Loads, (combined) (lbs)
12,000
Oil pump capacity (gpm)
-
Crankcase oil capacity (gal)
2.0
Oil Pressure (min - max) (psig)
-
Crankpin diameter (in)
35-60
Main bearing diameter (in)
-
Piston rod diameter (in)
-
Number of throws
1
Horsepower
60
RPM (min - max)
350-800
Frame lubrication
Splash
Stroke
4.5
Piston speed (fpm)
600
Crankshaft Centerline (inches)
13
Overall length, (max.) (inches)
90
Overall length, (max.) (inches)
29
Approx. weight (frame only) (lbs)
n/a
Rod Loads, (tension) (lbs)
6,000
Rod Loads, (compression) (lbs)
6,000
Rod Loads, (combined) (lbs)
12,000
Oil pump capacity (gpm)
-
Crankcase oil capacity (gal)
2.0
Oil Pressure (min - max) (psig)
-
Crankpin diameter (in)
35-60
Main bearing diameter (in)
-
Piston rod diameter (in)
-
COMPONENT
MATERIAL
Crankcase
Grey iron
Bearing housing
-
Flywheel
-
Crankshaft
Ductile iron
Main bearings
Double row spherical roller
Connecting rods
Ductile iron Class 60/40/18
Wrist pin
-
Wrist pin bearings
-
Crossheads
Ductile iron 60/40/18 babbitt faced
Crossheads guides
Grey iron
Piston rods (rolled threads)
Alloy steel AISI 4140
Cylinders, low pressure
STL / DI
Cylinders, medium pressure
STL / DI
Cylinders, high pressure
STL / DI
Pressure packing
-
Pistons, low pressure
STL / Grey CI / AL
Pistons, medium pressure
STL / Grey CI / AL
Pistons, high pressure
STL / Grey CI / AL
Valve seats and guards
Carbon steel
Valve springs
-
Note specific TFE blend to be determined per application. Our management system of standards is designed and reinforced to assure the quality of all operations and processes. Our continuous improvements apply to both quality and environmental requirements.
The Eagle series is a mid range line of compressors, designed to be coupled with today’s high speed drivers. Rod load ratings to 60,000 pounds combined with MAWP to 7200 PSIG give this series of compressors the flexibility to by applied in a variety of services.
Eagle series frame is available in both 2 and 4 throw configurations and the heavy duty frames are designed with internal and external ribbing. Full pressure lubrication to the frame running gear is accomplished by a crank mounted oil pump. Single piece babbit-faced crossheads have full pressure lubrication top and bottom assuring minimal wear and long life.
